Friday 29 July 2011

CCNA Practice Test Questions:

Start your CCNA practice test
A Word about CCNA Braindumps


20 CCNA Practice Test Questions
01. At what layer in the OSI model would you find protocols such as RIP and OSPF?

02. What is the difference between an 802.3 frame and an Ethernet frame?

03. Where is the running configuration located?

04. To force the router to ignore the configuration file in NVRAM, the configuration register should be set to which of the following ?

05. The CSMA/CD access method is defined by what IEEE standard?

06. What is the MTU for Ethernet?

07. Which topology is specified in the IEEE 802.5 standard?

08. Which of the following are true regarding STP?

09. Which of the following is the well-known TCP port for SMTP?

10. What address mask is associated with the following, 172.240.1.10/22?

11. What do the following “ping” results indicate?
router>ping 192.168.10.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.10.3, timeout is 2 seconds:
.UU

12. What is DUAL?

13. Distance Vector protocols use what algorithm?

14. A router has a route to 10.0.0.0 255.0.0.0 via RIP. It also has a route to 10.6.0.0 255.255.0.0 via IGRP. It wants to send a packet to 10.6.12.3. How will the packet be sent?

15. Which of the following statements regarding RIP are true?

16. In a RIP routing table, a route with a hop count of ____ indicates that the network is unreachable ?

17. VLSM is possible with ___?

18. What are the routing metrics used by IGRP?

19. Which of the following does not accept LSAs from any external autonomous systems?

20. Which of the following prompts indicates that you are in privileged mode?

ccna

http://www.lammle.com/blog/news-and-announcements/190/free-webinar-todd-lammle-on-ciscos-latest-ccna/