M................C....................S............................E

Multiple-choice exercise

1	Which is the usual measure of cache in a RAID system?
			Naughts
			MB
			GB
			KB
2	What is the maximum cable length allowed for Single Ended (or Unbalance) signaling system used by SCSI?
			25m
			6m
			3m
			12m
3	You are using your computer on a single disk drive. You have purchased another new hard disk and added it to your computer. After this addition, the computer is having problem while booting. What is the most likely cause?
			The second hard disk is faulty.
			Check whether the BIOS supports a second hard disk. Upgrade if required.
			Check the Master/Slave jumper settings on the newly purchased hard disk. Wrong jumper setting may be causing the problem.
			You need to re-load the operating system when you add a second hard disk.
4	What is true about DIMMs?[Choose 2].
	They come usually in 168 pin configuration
	They need to be installed two at a time
	They can be installed one at a time
	They do not use parity
5	FC-AL stands for which of the following?
			Fiber Channel Amplification Loop
			Fibre Channel Arbitrated Loop
			Fiber Channel Amplification Link
			Fiber Channel Arbitrated Link
6	Which of the following memory types introduce least delay when being written or read?
			Buffered memory
			Buffered and Registered memory
			Registered memory
			Unbuffered memory
7	Which of the following statements is true with respect to multi-processing?[Select 2].
	Windows 2000 Professional supports upto 2 Processors.
	Windows 2000 Server supports Symmetric Multi-Processing with upto 16 Processors.
	Windows Data Center Server supports upto 32 processors.
	Windows 98 supports upto 2 processors.
8	AGP stands for which of the following?
			Attenuated Graphics Port
			Adapted Graphics Port
			Amplified Graphics Port
			Accelerated Graphics Port
9	What is the maximum amount of physical memory that Intel Xeon processor can access?
			564 MB
			64 GB
			32 GB
			1 GB
10	Which of the following system memories is faster?
			ROM
			SRAM
			PRAM
			DRAM
11	Which of the following is true about Bus Mastering?
			Bus Mastering is a feature which enables the external devices to be connected to internal PCI bus.
			Bus Mastering is a feature that enables the Bus controller to communicate with the peripherals directly, without going through the CPU.
			Bus Mastering is a feature that enables the Bus Controller to communicate with other devices under constant control of CPU.
			Bus Mastering is feature that enables the CPU to communicate with the peripherals faster.
12	How many data bits does a 72-pin SIMM support?
			32
			8
			16
			64
13	You are planning a server procurement and need to dece whether to go for an ATA/E drive or a SCSI drive. You need greater flexibility with your disk drives. You also plan to deploy some of the hard disks for additional storage and a tape drive outse the Server case. Which disk drive is more suitable?
			EE
			E
			ATA
			SCSI
14	In a Hierarchical PCI Bus, the buses in the hierarchy operate concurrently.
			TRUE
			FALSE
15	Jane want to upgrade the processor from Pentium II to Pentium III in her computer. Which of the following activities she need to do for upgradation?[Select 2].
	Replace the Pentium II mother board.
	Upgrade the BIOS
	Replace the processor
	Replace the Processor socket on the mother board